Charging and control for optimizing the efficiency of batteries

GOT designed a process which analyses the battery state, thanks to a hardware and software technology with a constant monitoring of the battery performances. This process allows an automatic system reprogramming and proceeds with the management of the most suitable profile to improve the battery performances. Your batteries, used in industrial and civil sectors, from now on, can rely on a qualified service for a correct, scheduled maintenance.

Caricabatteria

Battery Charger

Line of electric chargers dedicated to the business and consumer worlds

Battery Discharger

Wide range of professional dischargers

Fluid

Supply of Technical Fluid for battery regeneration and maintenance

Software

IT system highly specialised in monitoring

Booth

Control Station for the maintenance and treatment of batteries

Mars Series SPhase

The battery chargers of the Mars Series are designed to recharge medium-large capacity traction and start lead-acid batteries and are the result of the founding members’ whith many hear of experience in the field of battery chargers, in the application of microprocessor control systems which constanly monitorize the basic parameters that assure a correct operation and therefore safeguard the battery’s life.

Technical characteristics :

- 230V - 50Hz one phase supply, (with possibility to request voltages different from the standard ones), adjustable to ± 5% or ± 10%
- Microprocessor-controlled programming and measuring via digital gearcase. Such microprocessor control is designed to optimize the charging cycles for any type of battery.
- 230V coil three-pole contactor - D.C. fuse on rectifier output.
- Stray flux mono-phase power transformer class H; impregnated in autoclave with ecological epoxy resins, with thermocouples for disconnection due to maximum temperature.
- Mono-phase rectifier bridge with silicon diodes, natural cooling, with snubber protection.
- Mains input and d.c. output polarized cables.
- Modular installation on galvanized steel base.
- Sheet steel case with modular panels so as to assure maximum accessibility in case of service.
- Epoxy powder coating, oven-baked, costumize paint color and logo
- New lexan plate with charging data very easy to understand.
- Equalizzed recall push button (Optional automatic version).
- Option to adjust the charging time from 90 to 210 minutes.
- Option to adjust the threshold voltage from 2.3 to 2.4 V/cell.
- Equalization charge timed - Led signaling charging phases or result.
- Short check of functions and times.
- Automatic disconnection of battery charger due to battery disconnection.

Mars Series TPhase

The battery chargers of the Mars Series are designed to recharge medium-large capacity traction and start lead-acid batteries and are the result of the founding members’ whith many hear of experience in the field of battery chargers, in the application of microprocessor control systems which constanly monitorize the basic parameters that assure a correct operation and therefore safeguard the battery’s life.

Technical characteristics :

- 3x400V three-phase supply - 3x220V (with possibility to request voltages different from the standard ones, single phase available on request), adjustable to ± 5% or (± 10%).
- Microprocessor-controlled programming and measuring via digital gearcase. Such microprocessor control is designed to optimize the charging cycles for any type of battery.
- 230V coil three-pole contactor - D.C. fuse on rectifier output.
- Delta-star stray flux three-phase power transformer class H; impregnated in autoclave with ecological epoxy resins, with thermocouples for disconnection due to maximum temperature.
- Three-phase rectifier bridge with silicon diodes, natural cooling, with snubber protection.
- Mains input and d.c. output polarized cables.
- Modular installation on galvanized steel base.
- Sheet steel case with modular panels so as to assure maximum accessibility in case of service.
- Epoxy powder coating, oven-baked, costumize paint color and logo
- New lexan plate with charging data very easy to understand.
- Equalizzed recall push button (Optional automatic version).
- Option to adjust the charging time from 90 to 210 minutes.
- Option to adjust the threshold voltage from 2.3 to 2.4 V/cell.
- Equalization charge timed - Led signaling charging phases or result.
- Short check of functions and times.
- Automatic disconnection of battery charger due to battery disconnection.

NEPTUNIUM Series SPhase

The battery chargers of the Neptunium Series are designed to recharge medium-large capacity traction and start lead-acid batteries and are the result of the founding members’ whith many hear of experience in the field of battery chargers, in the application of microprocessor control systems which constanly monitorize the basic parameters that assure a correct operation and therefore safeguard the battery’s life.  

Technical characteristics :

- 230V - 50Hz one phase supply, (with possibility to request voltages different from the standard ones), adjustable to ± 5% or ± 10%
- Electronic control provided with final charge timer
- Input cable and negative and positive battery cables (Shuko)
- Rectifier bridge with silicon diodes, natural cooling, with snubber protection and gemov
- Tropicalized stray-flux transformer: with double enamel insulation; class H; impregnated in autoclave with ecological epoxy resins.
- 12/10 sheet steel case provided with electrical bondings and ergonomic handle
- Epoxy powder coating, oven-baked, costumize paint color and logo
- Lexan plate with charging data very easy to understand
- Equalization recall push button (optional automatic version).
- Option to adjust the charging time.
- Option to adjust the threshold voltage from 2.3 to 2.4 V/cell.
- Equalization charge timed
- Led signaling charging phases or result.
- Short check of functions and times.

Venus Series TPhase

The battery chargers of the Venus Series are designed to recharge medium-large capacity traction and start lead-acid batteries and are the result of the founding members’ whith many hear of experience in the field of battery chargers, in the application of microprocessor control systems which constanly monitorize the basic parameters that assure a correct operation and therefore safeguard the battery’s life.  

Technical characteristics :

- 3x400V three-phase supply (single-phase available) - adjustable ± 5% with possibility to request voltage different from the standard ones.
- Microprocessor-controlled programming and measuring via digital gearcase. Such microprocessor control is designed to optimize the charging cycles for any type of battery.
- 220V coil three-pole contactor
- D.C. fuse on rectifier output.
- Three-phase rectifier bridge with silicon diodes, natural cooling, with snubber protection.
- Short check of functions and times.
- Option to program the equalized charge automatically to be required when ordering.
- Equalization charge based on time.
- Charging with decreasing current (Wa charging curve): 9÷11 h charging time.
- Transformer thermal protection.
- Installation on galvanized steel base.
- Sheet steel case with modular panels.
- Epoxy powder coating, oven-baked, costumize paint color and logo